Need to install Open VPN 2.1

[DJ7]

Hi,
I need to install openvpn on my 64bit centos server, to use HideMyAss VPN on it, i tried installing myself but getting dependencies error of lzo-devel.

I am even ready to pay if someone helps me out with it.

DJ7 Reviewed by DJ7 on 27th Jun 2010. Need to install Open VPN 2.1 Hi, I need to install openvpn on my 64bit centos server, to use HideMyAss VPN on it, i tried installing myself but getting dependencies error of lzo-devel. I am even ready to pay if someone helps me out with it. Rating: 5

[masterbator]

check your PM

[DJ7]

chk your pm, give me your msn if possible!

[butuh_doa]

this tutorial to install openvpn but in indonesian language..

http://blog.hostgokil.com/tutorial-i...ps-centos.html

[DJ7]

i have tutorial of openvpn-2.0.9, i said i need of 2.1 because HideMyASS only works with latest version, also the tut u gave was of x86 but my server as i mentioned is x64

[r0ck]

Hi,
I need to install openvpn on my 64bit centos server, to use HideMyAss VPN on it, i tried installing myself but getting dependencies error of lzo-devel.

I am even ready to pay if someone helps me out with it.

yum install lzo-devel
you may need RPMForge repo tho

[butuh_doa]

how about this repo

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

[r0ck]

I am interested in pptp for centos 5 if you have a guide for it

[DJ7]

thanks for this will try it tonight

Edit:
@Erratic
I suppose the guide you gave was to make our own vpn server but i need the client's guide to connect HideMyAss to mask server's ip and i think it supports pptp

[wideawake]

Set up / install.

http://sourceforge.net/projects/poptop/files/pptpd/pptpd-1.3.4/pptpd-1.3.4.tar.gz/download
tar -zxf pptpd-1.3.4.tar.gz
cd pptpd-1.3.4
./configure
make && make install
... set up the service or whatever, up to you.

OR, probably easier:

Change your yum to use whatever pptpd is located on if you can't find it, this may work though...

yum install ppp
Then:
yum install pptpd

Anyway, up to you how you install it. Once installed:

Edit the following file and save.
Note: These may vary on your network setup. I use these at OVH.
nano /etc/pptpd.conf

option /etc/ppp/options.pptpd
localip 192.168.0.234-238
remoteip 192.168.1.234-238

Edit the following file and save.
nano /etc/ppp/options.pptpd

name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
proxyarp
lock
nobsdcomp
novj
novjccomp
nologfd

Edit the following file and save.
nano /etc/ppp/chap-secrets

exampleuser pptpd examplepass *

Edit the following file and save.
Some IP table rules and settings:

nano /etc/sysctl.conf
change net.ipv4.ip_forward=0 to net.ipv4.ip_forward=1

Start pptpd, make sure it's all fine:

service pptpd start

Once done, set up your connection. In Windows 7:
Control Panel
Network & Sharing
Set Up New Connection
Connect to a Workplace
New Connection
"Use my internet connection (VPN)"
Address: IP address/domain of your server
Username & Password are what you put in the chapsecrets file.

If you get an "Encryption not supported" right click the connection in the task bar, go properties. Go into security and check data encryption "Optional".

This is a pretty basic guide, if you want to set up encryption and the more fancy stuff you can do so from here. This basically gets you connected though

To confirm it's working, check: http://wgtools.com/your-ip/ to see if it shows your server IP.

I can login but can not access any remote sites with this setup. I also have setup iptables.

/sbin/iptables -F
/sbin/iptables -t nat -F
/sbin/iptables -t mangle -F
/sbin/iptables -X
/sbin/iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128
/sbin/iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE
/sbin/iptables -A FORWARD -i eth2 -j ACCEPT
/sbin/iptables -A INPUT -i eth2 -p tcp --dport 1723 -j ACCEPT
/sbin/iptables -A INPUT -i eth2 -p gre -j ACCEPT
/sbin/iptables -A FORWARD -i ppp+ -o eth2 -j ACCEPT
/sbin/iptables -A FORWARD -i eth2 -o ppp+ -j ACCEPT
/sbin/iptables -A OUTPUT -p tcp --dport 1723 -j ACCEPT
/sbin/iptables -A OUTPUT -p gre -j ACCEPT
#/sbin/iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 80 -j REDIRECT --to-port 3128
/sbin/iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -j SNAT --to X.X.X.X
echo 1 > /proc/sys/net/ipv4/ip_forward